Filter Close
View as

Showing all 4 results

Page
1
/ 1
  • Ballistic Helmet Striker PLT PASGT Level IIIAStriker PLT Quick view
    Select options Add to wishlist Add to compare

    Ballistic Helmet Striker PLT PASGT Level IIIA

    Rated 0 out of 5
    $460.00 – $490.00

    Ballistic Helmet Striker PLT PASGT Level IIIA will keep you protected from various hand gun rounds with a level IIIA protection.

    SPECIFICATIONS for the Ballistic Helmet Striker PLT PASGT Level IIIA

    •  Protection: Level IIIA including frag protection
    • NIJ Standard 0106.01 TESTED: This product has been independently tested by an NVLAP accredited NIJ approved laboratory to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01
    • MIL-STD 662f: This product has been independently tested by an NVLAP accredited NIJ approved laboratory against FRAG resistance as specified under MIL-STD 662F
    • Materials for the Ballistic Helmet Striker PLT PASGT Level IIIA : Kevlar® fibers and thermoset resin shell construction
    • Head Protection: Front, back, crown, and side of the head
    • Weight Tolerance: +/- .15lbs / .068kg
    • Adjustable Harness: Multiple harness options available, comes standard with modi ed 4 PT ASSH harness with headband
    • Sizing: Circumference is measured around the head, similar to hat sizing. All sizes are measured in inches. If a measurement falls on a dividing line between sizes, select the larger of the two sizes to ensure maximum ballistic protection.
    • Warranty: 5 years on all ballistic material excluding exterior cover, 1 year on exterior cover material and workmanship

    NIJ 0106.01 THREATS

  • Advanced Combat Helmet Level IIIA Mid CutAdvanced Combat Helmet Level IIIA Mid Cut Quick view
    Select options Add to wishlist Add to compare

    Advanced Combat Helmet Level IIIA Mid Cut -Striker ACHMC

    Rated 0 out of 5
    $520.00

    SPECIFICATIONS

    • Protection: Level IIIA including frag protection
    • NIJ Standard 0106.01 TESTED: This product has been independently tested by an NVLAP accredited NIJ approved laboratory to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01
    • MIL-STD 662F: This product has been independently tested by an NVLAP accredited NIJ approved laboratory against FRAG resistance as specified under MIL-STD 662F
    • Materials: Hybridized Kevlar® fibers and UHMWPE Spectra® shell construction
    • Head Protection: Front, back, crown, and side of the head
    • Weight Tolerance: +/- .15lbs / .068kg
    • Adjustable Harness: Multiple harness options, comes standard with 4 pt harness
    • Padding: D3O TRUST Stealth™ 7 pad helmet system
    • Sizing: Circumference is measured around the head, similar to hat sizing. All sizes are measured in inches. If a measurement falls on a dividing line between sizes, select the larger of the two sizes to ensure maximum ballistic protection.
    • Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship

    NIJ 0106.01 THREATS

      [caption id="attachment_12708" align="alignnone" width="150"]Advanced Combat Helmet Level IIIA Mid Cut Advanced Combat Helmet Level IIIA Mid Cut[/caption] [caption id="attachment_12709" align="alignnone" width="150"]Advanced Combat Helmet Level IIIA Mid Cut Advanced Combat Helmet Level IIIA Mid Cut[/caption]
  • New Quick view
    Select options Add to wishlist Add to compare

    EEMANN TECH BRASS SHORT GRIPS FOR CZ 75, CZ 75 TS, CZ SHADOW 2

    Rated 0 out of 5
    $85.00
    The Eemann Tech Brass SHORT Grips for CZ 75, CZ 75 TS, CZ SHADOW 2. Made from Brass that increases the weight of the pistol and improves the balance when shooting. The grips are attached with the factory screws and a spare set is provided. To avoid the grip panels becoming loose we recommend the use of Blue loctite or mild strength thread locker. Self-adhesive grip tape is provided for attachment to each grip panel with a spare set provided. There are also rectangular shaped grip tape for use on the front and backstop of your pistol if allowed by your division rules. The SHORT grips are designed to work with and accommodate a Magwell! Not compatible with CZ compact models! Material: Brass Set contains: • 1 x Brass Short Grip Left • 1 x Brass Short Grip Right • 2 x Grip Tape Set (44-130022) • 2 x CZ OEM Grip Screw
  • Quick view
    Select options Add to wishlist Add to compare

    EEMANN TECH BRASS LARGE GRIPS FOR CZ 75, CZ 75 TS, CZ SHADOW 2

    Rated 0 out of 5
    $99.00
    Eemann Tech Brass Long Grips for CZ 75, CZ 75 TS, CZ SHADOW 2 Made from Brass that increases the weight of the pistol and improves the balance when shooting. The grips are attached with the factory screws and a spare set is provided. To avoid the grip panels becoming loose we recommend the use of Blue loctite or mild strength thread locker. Self-adhesive grip tape is provided for attachment to each grip panel with a spare set provided. There are also rectangular shaped grip tape for use on the front and backstop of your pistol if allowed by your division rules. Not compatible with CZ compact models! For use without a Magwell! Material: Brass Weight: 141g Set contains: • 1 x Brass Long Grip Left • 1 x Brass Long Grip Right • 2 x Grip Tape Set (44-130022) • 2 x CZ OEM Screw Available sizes: • Small - thickness: 0,8 mm • Medium - thickness: 1,8 mm • Large - thickness: 2,8 mm • Extra Large - thickness : 3,8 mm Weight: • Small- 68 gr (1 pc) / 136 gr (2 pcs) • Medium- 93 gr (1 pc) / 186 gr (2 pcs) • Large- 117 gr (1 pc) / 234 gr (2 pcs) • Extra Large- 145 gr (1 pc) / 289 gr (2 pcs)